JR VENTURE 30 PACKAGE
  |
Package Inclusions: - ARF (Almost Ready to Fly) Helicopter - High Tech Optic 6 Channel Computer Radio - 5 BallBearing Servos - OS 37SZ-H Engine - Curtis Youngblood Tuned Muffler - HL- 800 Heading Lock Gyro - Training Undercart $990.00 |
T-Rex 450 XL Deluxe Edition helicopter
  |
Package Inclusions: - Brushless Motor - ESC $299.00 |
UNIVERSAL TRAINING UNDERCART
 |
THIS UNIVERSAL TRAINING UNDERCART SUITS ALL .30 TO .90 ENGINE POWERED HELIS AS WELL AS THE BIGGER ELECTRIC HELICOPTERS. AS EACH LEG IS ANGULATED DOWNWARDS, THE LEGS ACT LIKE A SOFT SPRING, HELPING TO ABSORB THE SHOCK OF ANY ROUGH LANDINGS. THE LEGS ARE ATTACHED BY SUPPLIED RUBBER BANDS, BUT YOU CAN USE CABLE TIES ON THE SKIDS, IF SO DESIRED.
Part No.HELITRAINING $36.00 |
METRIC DELUXE ALLEN KEYS
 |
THIS SET OF 3 METRIC DELUXE ALLEN KEYS FEATURES ARTICULATED HANDLES.
Part No. MY782-2 $30.72 |
METRIC CY ALLEN KEY DRIVER
 |
THIS METRIC CY ALLEN KEY DRIVER IS MADE OF HARDENED STEEL, ENSURING LONG LIFE!
Part No. MY197 $11.47 |
METRIC ALLEN KEY SET
 |
THIS 3 PCE DELUX ANODIZED METRIC ALLEN KEY SET IS MADE FROM VERY HARD STEEL. A MUST FOR ALL HELICOPTER BUILDERS, NEEDING QUALITY ALLAN KEY DRIVERS.
Part No. MY196 $33.86 |
ROBBE BALL JOINT DRIVER
 |
THIS ROBBE BALL JOINT DRIVER, MAKES THE WINDING ON/OFF OF BALL LINKS A BREEZE.
Part No. 1-S5151 $7.70 |
THUNDER TIGER 5 WAY WRENCH
 |
THIS THUNDER TIGER 5 WAY WRENCH IS INEXPENSIVE GLOW PLUG REMOVAL TOOL AND IS USEFULL FOR OTHER NUT SIZES AS WELL.
Part No. TTR1116 $9.16 |
Z-bend Pliers
 |
THIS Z BEND PLYER WILL FORM JUST THE RIGHT BENDS FOR YOUR PUSHRODS, TO SUIT YOUR SERVO ARMS.
Part No. MY208 $17.71 |
Ball Link Pliers
 |
THIS SIMPLE, EASY TO USE ROBBE BALL LINK PLYER CAN BE USED FOR BOTH REMOVING AND REFITTING BALL LINKS. IT CAN EASILY BE ADAPTED TO WORK ON THE SMALLER 450 CLASS OF HELICOPTERS, AS WELL.
Part No. 1-S1360 $14.00 |
ROBBE PITCH GAUGE
 |
THIS PITCH GAUGE IS GOOD FROM -15 DEG TO +15 DEG AND FEATURES WHITE GRADUATIONS ON BLACK. A GOOD VALUE PITCH GAUGE.
Part No. TW390140 $25.00 |
ROBBE PITCH GAUGE
 |
THIS ROBBE PITCH GAUGE IS A TREAT TO USE, DUE TO ITS LONG STRAIGHT TOP SECTION (EASE OF LINING UP WITH FLYBAR) AND CLEAR WHITE DEGREE GRADUATIONS, ON A BLACK SURFACE. IN ITS COLLAPSED FORM, IT MEASURES FROM -10 DEG TO + 10 DEG.WITH THE BACK OF THE GAUGE “FANNED OUT”, BLADE ANGLES OF UP TO 20 DEGREES CAN BE MEASURED.
Part No. 1-S1366 $58.21 |
ROBBE PITCH GAUGE
 |
THIS ROBBE PITCH GAUGE IS A VERY EASY TO USE DESIGN, DUE TO EASE OF LINING UP ITS STRAIGHT EDGE AGAINST THE FLYBAR. THE WHITE GRADUATIONS ARE VERY VISIBLE AND EASY TO READ. THE GAUGE MEASURES FORM -15 DEG TO +15 DEG!
Part No. 1-21304 $38.43 |
STARTER RUBBER CONE
 |
THIS REPLACEMENT STARTER RUBBER CONE OF 37mm O.D. WILL SUIT MOST STARTERS.
Part No. MY297 $7.15 |
SULLIVAN DYNATRON
 |
THE SULLIVAN DYNATRON is the most powerfull electric starter on the market and can be run with 12v or 24v for maximum bang for your buck!
Part No. SUL-603 $185.90 |
POWER MAX STARTER
 |
THIS POWER MAX STARTER IS RATED FOR 120 SIZE ENGINES AND IN HELICOPTERS, IT WILL COMFORTABLY HANDLE A 90 SIZE HELI.
Part No. EAGPM-120 $97.02 |
PROLUX STARTER
 |
THIS PROLUX STARTER IS GOOD FOR UP TO 60 SIZE HELIS and 90 SIZE AIRCRAFT.
Part No. PL1270 $39.00 |
THUNDER TIGER MUFFLER
 |
THIS HIGH PERFORMANCE MUFFLER SUITS THE RAPTOR 50 BUT CAN BE ALSO USED WITH OTHER 50 SIZE HELIS.
Part No. PV0109 $89.80 |
HATORI TUNED PIPE
 |
A LONG CHAMBER TUNED PIPE TO SUIT 10CC ENGINE. HEADER PIPE IS NOT INCLUDED.
Part No. HAT668 $120.00 |
HATORI TUNED PIPE
 |
A TUNED PIPE FOR .46 ENGINES. COMES WITH MOUNTING BRACKET, SILICAN JOINER, BUT ADAPTING HEADER TO ENGINE IS NOT INCLUDED.
Part No. HAT444 $70.00 |
